Need help right now? Click here.
|
What maintenance is required for my machine? After every 20-30 hours of operation, it's a good idea to remove the needle plate and bobbin case. Clean out all the lint that has accumulated under the bobbin case. In the center of the hook basket (the round metal piece that the bobbin case sits on), there is a hole with a wick in it. DO NOT PULL OUT THE WICK! Sometimes people confuse it with lint. Put 1-3 drops of light sewing machine oil on the wick, replace the bobbin case and needle plate. Do not use 3-in-1 oil or WD-40. Both are very sticky and can leave residue that will cause problems. All other maintenance must be done by your dealer. If you use the machine 20 hours per week or less, your dealer should see it at least once per year for cleaning and maintenance. For heavier use, your dealer should see it twice or even 3 times per year. Keeping the machine clean will greatly lengthen its life and prevent problems. |
 |
© 2002 by James W. Stutsman |
