Getting 9000 Cards into Your Computer - Card Method

Follow these simple steps:
  1. Put the PC Card in your computer.
  2. Open EasyImport or EasyTransfer, whichever you have.
  3. From the menu, choose ATA Card -> Write Designs, Read and Erase.
  4. Make sure the Select Open/Save Folder box is checked.
  5. Select all the designs in the list on the top right part of the dialog.
  6. Click the Erase button (Erase <--). When all designs are gone, click the Exit button.
  7. Put the ATA PC Card in the MC10000.
  8. Put the Memory Card in the Card Reader.
  9. At the sewing machine, open the first design on the 9000 card.
  10. Touch the Edit key. This will put the design in the Edit screen.
  11. Touch the Folder key on the Edit screen. This opens the file save dialog.
  12. Touch the Built-in/Save key so it says Save (Card) on the screen.
  13. This step is optional, but recommended. Touch the Filename key. For a file name, I recommend using the card number and the design number within the card. For example, the 4th design on card 109 would be named as 109_04. I use two digits for each design number, so that they will sort into proper order on the computer.
  14. Save the design by touching the OK key.
  15. Exit the Edit mode by touching the Cancel key.
  16. Repeat steps 8-14 for each of the other designs on the card.
  17. Put the PC Card back in your computer.
  18. Again choose ATA Card -> Write Designs, Read and Erase.
  19. Make sure the Select Open/Save Folder box is checked.
  20. All of the designs will be listed. Choose the folder where you want them to be saved in the box at the bottom of the dialog.
  21. Select all of the designs in the list of what's on the card.
  22. Click the Read button (<--).