Getting 9000 Cards into Your Computer - Cable Method

Follow these simple steps:
  1. Put the ATA PC Card in the MC10000.
  2. Open EasyImport or EasyTransfer, whichever one you have.
  3. From the menu, choose MemoryCraft -> Delete Designs.
  4. When the Delete Designs dialog opens, make sure the Use Open/Save Folder option in the top left corner is checked.
  5. Click the Select All Designs button.
  6. Click the Delete button. Warning! This will remove all designs from the Emb_file folder on the card. Make sure you have a copy of them before doing this step!
  7. Put the Memory Card in the Card Reader.
  8. At the sewing machine, open the first design on the 9000 card.
  9. Touch the Edit key. This will put the design in the Edit screen.
  10. Touch the Folder key on the Edit screen. This opens the file save dialog.
  11. Touch the Built-in/Save key so it says Save (Card) on the screen.
  12. This step is optional, but recommended. Touch the Filename key. For a file name, I recommend using the card number and the design number within the card. For example, the 4th design on card 109 would be named as 109_04. I use two digits for each design number, so that they will sort into proper order on the computer.
  13. Save the design by touching the OK key.
  14. Exit the Edit mode by touching the Cancel key.
  15. Repeat steps 8-14 for each of the other designs on the card.
  16. In the computer, in the program you opened in step 2, select MemoryCraft -> Receive Designs.
  17. The Receive Designs folder will open. Again make sure you check the Use Open/Save Folder box.
  18. Change the Folder box to the folder where you want the designs to go.
  19. Click the Receive button to transfer the designs.